fischer ceiling nail FDN 6/5 (6 x 35)

The cost-efficient push-through anchor for multiple fixings

Advantages

The simple active principle allows for cost-efficient hammerset installation.
The flush-sunk expansion nail signifies the complete expansion of the anchor, and thereby ensures minimum movement when under load.
The two hit zones (first nail head, then expansion pin) ensure correct installation - especially in narrow drill holes - and also ensure high safety in use.
The head embossing offers a simple control of the anchoring, and thus saves time.

The fischer ceiling nail FDN is a push-through anchor made from zinc-plated steel. The FDN is approved for multiple fixing of non-load-bearing systems in concrete. The ceiling nail is set in the time-saving push-through installation and then hit with the hammer into the drill hole. The expansion wedge is then driven in flush to the nail head. This causes the FDN to expand against the hole wall. The fischer ceiling nail FDN is ideal for fixing wire and nonious hangers, air lines, and metal profiles.

Applications

Wire and Nonius hangers
Ventilation systems
Slats
Metal profiles
Perforated tapes
Sub-structures made of metal

Building materials

Approved for:

Concrete C20/25 to C50/60, cracked, for the multiple fixings of non-load-bearing systems

Also suitable for:

Concrete C12/15
Natural stone with dense structure

You can find detailed information on building materials in the registration document.

Approvals

ETA-07/0144
DoP No. 0018
DoP No. 0106

ETA Certification Document

pdf, ETA-07/0144

European Technical Assessment for fischer Ceiling Anchor FDN - Deformation-controlled expansion anchor for multiple use for non-structural applications in concrete

Created on 06/04/2017

DOP - Declaration of Performance

pdf, DoP No. 0106

Declaration of Performance for fischer Ceiling Anchor FDN (Metal anchors for use in concrete (light-duty type))

Created on 18/04/2016

DOP - Declaration of Performance

pdf, DoP No. 0018

Declaration of Performance for fischer Ceiling Anchor FDN

Created on 27/07/2015

Load Table

pdf,

Ceiling nail FDN - Highest permissible loads for a single anchor as part of a multiple ﬁxing of non-structural systems in concrete C20/25 up to C50/60.

ETA-approval
Drill diameter ( d₀ )	6 mm
Min. drill hole depth for through fixings ( h₂ )	45 mm
Amount	100 pcs.
GTIN (EAN-Code)	4006209786444

fischer ceiling nail FDN 6/5 (6 x 35)

The advantages / Product description

Application and approval

Assembly instruction

Technical data

Documents for download