83 mm high aluminium rail for PV panels mounting systems.
Rail SolarMid
SolarMid is a 83 mm high aluminium rail for PV mounting systems on pitched and flat roofs, particularly suitable to optimize the number of fastenings in case of heavy stress forces acting on the structure. The four side grooves and the lower groove are compatible with SKS M8 screws or RHS hammer head screws. SolarMid is compatible with PM U / PMC U universal clamps; it is compatible with PV systems on flat roofs (in combination with STFS and STFN triangular frames) and industrial roofs. It's also compatible with pitched roofs (in combination with aluminium and stainless stells hooks), non-removable corrugated panels or barrel/flat tile roof (in combination with STSR and STSI double-threaded screws) and trapezoidal metal sheet roof (in combination with DLA and DLAK clamps).
Two panels can be mounted on a single rail thanks to the wide top surface.
Compatible with installation both from the side and from the bottom.
Compatible with SKS M8 hexagonal screws or RHS hammer head screws.
Application and approval
Applications
Aluminium rail for PV panels mounting systems compatible with PM U / PMC U universal clamps, in combination with triangles for flat roofs and rails for special structures.
Assembly instruction
Functionality
Identify the correct support components based on the type of roof (e.g. triangular frames for flat roofs, rails for special structures etc).
Position the selected support components and the rail according to the structure layout (use SOLARPANEL-FIX software to design the system).
Use 2 CPN AL joints on both sides to connect the rails (a complete connection requires 4 CPN AL joints).
Slide the CPN AL joint until the central stud touches the end side of the rail.
Every CPN AL joint has to be connected to the rails with eight 3.5 mm x 9.5 mm self-drilling screws (two screws per rail side).
Consider a thermal break of at least 50 mm every 15 m.
