For concealed fixing of façade panels in ventilated rainscreen façades.

Clasps

The clasps are part of the concealed fixing system for ventilated rainscreen façades together with undercut anchors. They are mounted on the undercut anchors which are installed into the façade panel and transfer the loads caused by the façade panels to the horizontal profiles. Thanks to the coordinated geometry, the clasps can be suspended quickly and easily in the horizontal profiles. The two clasps at the top, on the outside, have adjustment screws to adjust the height of the panel and thus create a consistent joint pattern. The clasps are also offered as fixed or sliding points. While the fixed points are fixed by accessories (e.g. clamps or U-profiles), the non-fixed sliding points allow the thermal expansion of the system. The clasps are available in different dimensions. In combination with the fischer undercut anchor, the clasps ensure stress-free fixing of the façade panels.
Warianty produktuDownload of image data

Warianty produktu

Filtro
Filtro
184 Varianti del prodotto
Hole-ø
Height
System
Amount
Contents
GTIN (EAN-Code)
Più risultati
Visualizzate 18 di 184 varianti

Korzyści /opis produktu

Advantages
  • Clasps can be pre-assembled, saving time on the construction site.
  • Fast and easy installation of façade panels thanks to the coordinated geometries of the clasps and horizontal profiles.
Properties
  • Aluminium (e. g. EN AW 6063, 6061)

Zastosowanie i aprobata

Applications
  • As a suspension element in the horizontal profile for subframe systems ATK103 and SystemOne BS in ventilated rainscreen façades.
  • As suspension clasps for suspension nuts for pure vertical substructure systems for ventilated curtain walls.
Building materials
  • Natural stone (≥ 20mm)
  • Artificial concrete panels (e.g. GFRC, UHPC, etc.)
  • Ceramics
  • Porcelain stoneware
  • Fibre cement
  • HPL panels
  • Solid surface panels
  • Thin panel materials (≥ 8 mm)
* Szczegółowe informacje na temat znajdziesz w dokumencie rejestracji.
Aprobaty
  • DoP: BWM-LE-005
  • DoP: BWM-LE-006
  • DoP: BWM-LE-007
  • DoP: BWM-LE-008

Instrukcja montażu

Functionality
  • Load transfer to the building substrate (dead weight and wind)
  • Absorption of loads through the connection to the undercut anchors
  • Easy installation with conventional fixings and undercut anchors

Dokumenty do pobrania

  • ETAs and DoPs
Declaration of Performance for parts for subframe system construction made of aluminium / stainless steel for building envelopes (Wall brackets, wall holders, extrusion profiles, clasps, fixing clamps)
Utworzono 08/05/2024
Declaration of Performance for parts for subframe system construction made of aluminium / stainless steel for building envelopes (Wall brackets, wall holders, extrusion profiles, clasps, fixing clamps)
Utworzono 08/05/2024
Declaration of Performance for parts for subframe system construction made of aluminium / stainless steel for building envelopes (Wall brackets, wall holders, extrusion profiles, clasps, fixing clamps)
Utworzono 08/05/2024
Declaration of Performance for parts for subframe system construction made of aluminium / stainless steel for building envelopes (Wall brackets, wall holders, extrusion profiles, clasps, fixing clamps)
Utworzono 08/05/2024
cd-green-64c8fdbcdb-6hnp2