FBS II 10x160 105/95/75 US | fischer Middle east

fischer UltraCut FBS II 10 x 160 105/95/75 US

The high-performance concrete screw for absolute installation ease.

Art.-No. 536865

Top Features

With up to 3 embedment depths, it allows for the same screw to be used for different component thicknesses.
The special saw tooth geometry enables fast cutting into the concrete.
The approved adjustment for the concrete screws allows the screw to be unscrewed twice to align the attached part, and then to tighten the screw again.

Product Description

The fischer UltraCut FBS II is the perfect concrete screw for top installation comfort. The special saw tooth geometry enables fast cutting into the concrete. Drill hole cleaning is not required for installations in ceilings or floors. Thanks to the national approval, multiple usage for temporary anchorings (for example, formwork construction) is permitted. For the installation of the wall screw, we recommend a tangential impact driver with a compatible socket or a special TX bit. The concrete screw is ideal for the fixation of railings, protection barriers, cantilevers, and formwork bracings, for example.

Advantages

With up to 3 embedment depths, the UltraCut FBS II US allows for the same screw to be used for different component thicknesses.
The special saw tooth geometry enables fast cutting into the concrete.
Drill holes do not need to be cleaned during vertical installation (ceiling and floor). For floor fixings the hole must be drilled 3x drill hole diameter deeper.
Expansion-free anchoring (undercut) allows for lowest edge- and axial spacings.
The ETA approval covers applications in cracked concrete and seismic power categories C1 and C2.
The approved adjustment for the concrete screws allows the screw to be unscrewed twice to place maximum 10 mm packing below the base plate head or to align the attached part, and then to tighten the screw again.
The checking gauge allows for reuse in temporary fixings (e.g. inclined supports) covered by the national approval.
The FSW adjusting disc works with the fischer UltraCut FBS II 10 US concrete screw to easily install wooden beams / timber sleepers.

Application and Permission

Applications

Guard rails
Consoles/Base plates
Metal profiles
Shelving systems
Protection barriers
Results / beam anchors
Temporary anchoring, e.g. of building site equipment
Shuttering props
Reinforcement of bridges
Rehabilitation of old and ailing buildings
Rehabilitation of car parks

Building materials

Approved for:

Concrete C20/25 to C50/60, cracked and non-cracked
Reinforcement of existing concrete structures

Also suitable for:

Concrete C12/15
Solid building materials
Masonry with a dense structure

You can find detailed information on building materials in the registration document.

Permission

ETA-15/0352
ETA-20/0321
DoP 0225
DoP 0227
DoP No. 0078
DoP No. 0146
Z-21.8-2049

For Details see corresponding Documents

Assembly Instruction

Functionality

The UltraCut FBS II is recommended for the push-through installation.
Drill holes do not need to be cleaned during vertical installation (ceiling and floor). For floor fixings the hole must be drilled 3x drill hole diameter deeper.
We recommend using a tangential impact screwdriver with a suitable impact screwdriver socket or an internal TX drive.
The screw is installed correctly when the screw head sits flush on the fixture and cannot be screwed in deeper (visual setting control).

Show assembly instruction as PDF

Technical Data

ETA-approval
DIBt-approval
Drill diameter	d₀	10	[mm]
Min. drill hole depth for through fixings	h₂	170	[mm]
Screw	d_s x l_s	12.0 x 160	[mm]
Screw-in depth with fixture thickness	h_nom1 / t_fix	55 / 105	[mm]
Screw-in depth with fixture thickness	h_nom2 / t_fix	65 / 15	[mm]
Screw-in depth with fixture thickness	h_nom3 / t_fix	85 / 75	[mm]
Drive		SW 15
Packaging		Folding box
Amount		50	[pcs.]
GTIN (EAN-Code)		4048962251487

Legend = Permission Available

CAD Data CAD Data

Documents for Downloading

Additional Documents

Approvals

Title	Type	Created	Valid Till
ETA - European Technical Assessment (PDF, 4 MB) European Technical Assessment for fischer concrete screw ULTRACUT FBS II - Mechanical fasteners for use in concrete	ETA-15/0352	10/5/2020
ETA - European Technical Assessment (PDF, 2 MB) European Technical Assessment for fischer concrete screw ULTRACUT FBS II - Connector for Strengthening of existing concrete structures by concrete overlay	ETA-20/0321	6/19/2020
DOP - Declaration of Performance (PDF, 2 MB) Declaration of Performance	DoP 0225	6/19/2020
DOP - Declaration of Performance (PDF, 5 MB) Declaration of Performance	DoP 0227	10/19/2020
DOP - Declaration of Performance (PDF, 2 MB) Declaration of Performance	DoP No. 0078	4/19/2016
DOP - Declaration of Performance (PDF, 3 MB) Declaration of Performance	DoP No. 0146	11/6/2018
DIBt, National German Approval (PDF, 655 KB) DIBt Approval - fischer concrete screw ULTRACUT FBS II for the temporary fastening of building site equipment	Z-21.8-2049	7/14/2021	7/14/2026