Concrete screw UltraCut FBS II US R

Product Description

Advantages

The specially hardened red tip provides a faster and more secure installation.
The stainless steel concrete screw guarantees a high level of corrosion resistance especially for wet rooms and external applications.
The special saw tooth geometry enables fast cutting into the concrete.
Drill holes do not need to be cleaned during vertical installation (ceiling and floor). For floor fixings the hole must be drilled 3x drill hole diameter deeper.
The ETA approval covers applications in cracked concrete and seismic power categories C1 and C2.
The approved adjustment for the concrete screws allows the screw to be unscrewed twice to place maximum 10 mm packing below the base plate head or to align the attached part, and then to tighten the screw again.
The three embedment depths, allow for using the UltraCut FBS II R in many different applications and enable a high flexibility.
The short UltraCut FBS II R, with a reduced embedment in depth, allows for a short drill hole depth, fast installation and less reinforcement hits.

Available Product Variants

14 Product variant (s) found

Variant

ETA-approval

Drill diameter

d₀

Min. drill hole depth for through fixings

h₂

Screw

d_s x l_s

Legend = Permission Available — = Permission not Available

Viewed 14 of 14 variant (s)

added to cart

View Cart

Application and Permission

Applications

Guard rails
Consoles/Base plates
Metal profiles
Steel constructions
Façades
Protection barriers

Building materials

Approved for:

Concrete C20/25 to C50/60, cracked and non-cracked

Also suitable for:

Concrete C12/15
Solid building materials
Masonry with a dense structure

You can find detailed information on building materials in the registration document.

Permission

ETA-17/0740
DoP No. 0134
DoP No. 0148

For Details see corresponding Documents

Assembly Instruction

Functionality

The UltraCut FBS II R is recommended for the push-through installation.
Drill holes do not need to be cleaned during vertical installation (ceiling and floor). For floor fixings the hole must be drilled 3x drill hole diameter deeper.
We recommend using a tangential impact screwdriver with a suitable impact screwdriver socket or an internal TX drive.
The screw is installed correctly when the screw head sits flush on the fixture and cannot be screwed in deeper (visual setting control).

Show assembly instruction as PDF

Documents for Downloading

Additional Documents

Approvals

Title	Type	Created
ETA - European Technical Assessment (PDF, 941 KB) European Technical Assessment for fischer concrete screw ULTRACUT FBS II A4 - Mechanical fasteners for use in cracked and uncracked concrete	ETA-17/0740	10/23/2018
DOP - Declaration of Performance (PDF, 610 KB) Declaration of Performance	DoP No. 0134	5/23/2018
DOP - Declaration of Performance (PDF, 695 KB) Declaration of Performance	DoP No. 0148	10/30/2018

System Components & Related Categories

System Components

Hammer drill bit Quattric II

Hammer drill bit Quattric II

The expert for the best performance in reinforced concrete

More Information

Related Categories

Concrete screw UltraCut FBS II US

The high-performance concrete screw for absolute installation ease

More Information

Concrete screw UltraCut FBS II SK R

The high-performance concrete screw for absolute installation ease and external applications

More Information

Concrete screw UltraCut FBS II SK

The high-performance concrete screw for absolute installation ease

More Information

ETA-approval
Drill diameter d₀	8 [mm]
Min. drill hole depth for through fixings h₂	70 [mm]
Screw d_s x l_s	10.0 x 60 [mm]
Screw-in depth with fixture thickness h_nom1 / t_fix	50 / 10 [mm]
Screw-in depth with fixture thickness h_nom2 / t_fix	— [mm]
Screw-in depth with fixture thickness h_nom3 / t_fix	— [mm]
Drive	SW 13
Packaging	Folding box
Amount	50 [pcs.]
GTIN (EAN-Code)	4048962308174

ETA-approval
Drill diameter d₀	8 [mm]
Min. drill hole depth for through fixings h₂	80 [mm]
Screw d_s x l_s	10.0 x 70 [mm]
Screw-in depth with fixture thickness h_nom1 / t_fix	50 / 20 [mm]
Screw-in depth with fixture thickness h_nom2 / t_fix	— [mm]
Screw-in depth with fixture thickness h_nom3 / t_fix	65 / 5 [mm]
Drive	SW 13
Packaging	Folding box
Amount	50 [pcs.]
GTIN (EAN-Code)	4048962308181

ETA-approval
Drill diameter d₀	8 [mm]
Min. drill hole depth for through fixings h₂	90 [mm]
Screw d_s x l_s	10.0 x 80 [mm]
Screw-in depth with fixture thickness h_nom1 / t_fix	50 / 30 [mm]
Screw-in depth with fixture thickness h_nom2 / t_fix	— [mm]
Screw-in depth with fixture thickness h_nom3 / t_fix	65 / 15 [mm]
Drive	SW 13
Packaging	Folding box
Amount	50 [pcs.]
GTIN (EAN-Code)	4048962308198

ETA-approval
Drill diameter d₀	8 [mm]
Min. drill hole depth for through fixings h₂	100 [mm]
Screw d_s x l_s	10.0 x 90 [mm]
Screw-in depth with fixture thickness h_nom1 / t_fix	50 / 40 [mm]
Screw-in depth with fixture thickness h_nom2 / t_fix	— [mm]
Screw-in depth with fixture thickness h_nom3 / t_fix	65 / 25 [mm]
Drive	SW 13
Packaging	Folding box
Amount	50 [pcs.]
GTIN (EAN-Code)	4048962308204

ETA-approval
Drill diameter d₀	10 [mm]
Min. drill hole depth for through fixings h₂	70 [mm]
Screw d_s x l_s	12.0 x 60 [mm]
Screw-in depth with fixture thickness h_nom1 / t_fix	55 / 5 [mm]
Screw-in depth with fixture thickness h_nom2 / t_fix	— [mm]
Screw-in depth with fixture thickness h_nom3 / t_fix	— [mm]
Drive	SW 15
Packaging	Folding box
Amount	50 [pcs.]
GTIN (EAN-Code)	4048962308211

ETA-approval
Drill diameter d₀	12 [mm]
Min. drill hole depth for through fixings h₂	80 [mm]
Screw d_s x l_s	14.0 x 70 [mm]
Screw-in depth with fixture thickness h_nom1 / t_fix	55 / 85 [mm]
Screw-in depth with fixture thickness h_nom2 / t_fix	— [mm]
Screw-in depth with fixture thickness h_nom3 / t_fix	— [mm]
Drive	SW 17
Packaging	Folding box
Amount	20 [pcs.]
GTIN (EAN-Code)	4048962308273