Bolt anchor FXA

Product Description

Advantages

The standard anchorage depth achieves the maximum loadbearing capacities so fewer fixing points and smaller anchor plates are required.
With only a few hammer blows and minimal torque slippage installation is a simple process.
The drive-in pin protects the thread from damage, and ensures a faster installation and dismantling of the attachment.

Available Product Variants

27 Product variant (s) found

Variant

ETA-approval

Drill diameter

d₀

Min. drill hole depth for through fixings

h₂

Anchor length

Legend = Permission Available — = Permission not Available

Viewed 18 of 27 variant (s)

added to cart

Application and Permission

Applications

Building materials

Approved for:

You can find detailed information on building materials in the registration document.

Permission

For Details see corresponding Documents

Assembly Instruction

Functionality

The FXA is suitable for pre-positioned and push through installation, also suitable for stand off installation under certain conditions.
Prior to installation, place the hexagon nut in the optimal position (the drive-in pin projects by approx. 3 mm out of the hexagon nut).
When applying the torque, the cone bolt is pulled into the expansion clip and expands it against the drill hole wall.
The head embossing offers a simple control of the anchoring.

Documents for Downloading

Approvals

Title	Type	Created
ETA - European Technical Assessment (PDF, 2 MB) European Technical Assessment for fischer Bolt anchor FXA - Torque controlied expansion anchor for use in non-cracked concrete	ETA-13/0772	9/27/2017
DOP - Declaration of Performance (PDF, 987 KB) Declaration of Performance	DoP 0193	7/28/2020
DOP - Declaration of Performance (PDF, 1 MB) Declaration of Performance	DoP No. 0034	10/6/2017

ETA-approval
Drill diameter d₀	8 [mm]
Min. drill hole depth for through fixings h₂	61 [mm]
Anchor length l	66 [mm]
Width across nut	13 [mm]
Amount	50 [pcs.]
GTIN (EAN-Code)	4048962183481

ETA-approval
Drill diameter d₀	8 [mm]
Min. drill hole depth for through fixings h₂	66 [mm]
Anchor length l	71 [mm]
Width across nut	13 [mm]
Amount	50 [pcs.]
GTIN (EAN-Code)	4048962183498

ETA-approval
Drill diameter d₀	8 [mm]
Min. drill hole depth for through fixings h₂	86 [mm]
Anchor length l	91 [mm]
Width across nut	13 [mm]
Amount	50 [pcs.]
GTIN (EAN-Code)	4048962183504

ETA-approval
Drill diameter d₀	8 [mm]
Min. drill hole depth for through fixings h₂	106 [mm]
Anchor length l	111 [mm]
Width across nut	13 [mm]
Amount	50 [pcs.]
GTIN (EAN-Code)	4048962184280

ETA-approval
Drill diameter d₀	10 [mm]
Min. drill hole depth for through fixings h₂	78 [mm]
Anchor length l	86 [mm]
Width across nut	17 [mm]
Amount	50 [pcs.]
GTIN (EAN-Code)	4048962183511

ETA-approval
Drill diameter d₀	12 [mm]
Min. drill hole depth for through fixings h₂	95 [mm]
Anchor length l	106 [mm]
Width across nut	19 [mm]
Amount	20 [pcs.]
GTIN (EAN-Code)	4048962183559

ETA-approval
Drill diameter d₀	16 [mm]
Min. drill hole depth for through fixings h₂	129 [mm]
Anchor length l	145 [mm]
Width across nut	24 [mm]
Amount	10 [pcs.]
GTIN (EAN-Code)	4048962183603

Cost efficient fixing with ETA assessment for non-cracked concrete