Product Category Picture
Application Picture
Application Picture
1   1

Bolt anchor FWA (metric)

The cost-effective fixation without approval - for use in non-cracked concrete

Product Description

Advantages
  • The standard anchorage depth achieves high load-bearing capacities. This means that fewer fixing points and smaller anchor plates are required.
  • The reduced anchorage depth reduces the drill hole depth. This minimises the amount of time needed for installation whilst increasing flexibility.
  • Available with metric and imperial threads

Available Product Variants


52 Product variant (s) found

52 Product variant (s) found

Variant
Drill diameter

d0

Min. drill hole depth for through fixings

h2

Anchor length

l

Width across nut

SW

Art.-No. 045582

6 [mm]

55 [mm]

55 [mm]

10 [mm]

Art.-No. 045598

6 [mm]

70 [mm]

70 [mm]

10 [mm]

Art.-No. 045644

8 [mm]

50 [mm]

50 [mm]

13 [mm]

Art.-No. 502893

8 [mm]

60 [mm]

60 [mm]

13 [mm]

Art.-No. 045788

8 [mm]

65 [mm]

65 [mm]

13 [mm]

Art.-No. 045789

8 [mm]

80 [mm]

80 [mm]

13 [mm]

Art.-No. 045790

8 [mm]

95 [mm]

95 [mm]

13 [mm]

Art.-No. 045791

8 [mm]

120 [mm]

120 [mm]

13 [mm]

Art.-No. 045645

10 [mm]

65 [mm]

65 [mm]

17 [mm]

Art.-No. 045792

10 [mm]

80 [mm]

80 [mm]

17 [mm]

Art.-No. 045793

10 [mm]

95 [mm]

95 [mm]

17 [mm]

Art.-No. 045794

10 [mm]

115 [mm]

115 [mm]

17 [mm]

Art.-No. 045646

10 [mm]

130 [mm]

130 [mm]

17 [mm]

Art.-No. 503367

10 [mm]

140 [mm]

140 [mm]

17 [mm]

Art.-No. 503368

10 [mm]

160 [mm]

160 [mm]

17 [mm]

Art.-No. 503369

10 [mm]

180 [mm]

180 [mm]

17 [mm]

Art.-No. 503370

10 [mm]

200 [mm]

200 [mm]

17 [mm]

Art.-No. 045647

12 [mm]

80 [mm]

80 [mm]

19 [mm]

More results Viewed 18 of 52 variant (s)
0

Application and Permission

Applications
  • Steel constructions
  • Guard rails
  • Consoles
  • Ladders
  • Cable trays
  • Machines
  • Staircases
  • Gates
  • Façades
Building materials
  • Concrete C20/25, non-cracked
* You can find detailed information on building materials in the registration document.

Assembly Instruction

Functionality
  • The FWA is suitable for pre-positioned and push-through installation.
  • Prior to installation, place the hex nut in the optimal position (the drive-in pin projects by approx. 3 mm out of the hex nut).
  • When the torque is applied, the cone bolt is pulled into the expansion clip and expands it against the drill hole wall.
Mounting Strip 1 Picture
Mounting Strip 1 Picture
Mounting Strip 1 Picture
Mounting Strip 1 Picture
Mounting Strip 1 Picture

Documents for Downloading

Additional Documents

10.209.131.64