TermoZ CNplus | fischer Middle east

TermoZ CNplus

The versatile ETICS hammerset fixing with the option to be screw set

The fischer TermoZ CNplus is ideal for securely fixing pressure-resistant insulation up to 340 mm thick, such as polystyrene boards and mineral wool boards. The European Technical Assessment guarantees secure hold and regulates the use in all building material classes and insulation types. The TermoZ CNplus is set with a hammer. Alongside the small drill hole depth, this saves time and money during installation. However, it can also be screwed into the anchoring base. The flexible hammerset is placed exactly flush to the surface or countersunk, depending on the desired application. The termoz CNplus can also be adjusted with the screwdriver and removed without problems.

Product Description

Advantages

TermoZ CNplus is a hammerset anchor with the option to be screw set. The plug is suitable for all building material and insulation types. Through the flexible use the warehouses and ordering processes are reduced.
With the fast and simple hammerset installation the plugs set too deep can be readjusted with the aid of the screwdriver. This saves working time and helps to avoid fixing marks.
During the screw installation the TermoZ CNplus can be set countersunk or flush. For different set results only one plug is required.
Moreover the screw installation enables an accurate setting due to an optimum application on the insulation surface. Also with soft insulation.
The compound nail ensures a high energy efficiency with the countersunk screw installation, because there is nearly no heat transmission.

Available Product Variants

15 Product variant (s) found

Variant

ETA-approval

Drill diameter

d₀

Anchor length

Effect. anchorage depth

h_ef

Legend = Permission Available — = Permission not Available

Viewed 15 of 15 variant (s)

added to cart

View Cart

Application and Permission

Applications

Attachment of ETICS insulating boards on concrete and masonry
Flush installation in ETICS insulating boards, e.g. polystyrene and mineral wool
Countersunk installation in ETICS insulating boards, e.g. polystyrene and mineral wool, incl. a closing cap for covering

Building materials

Building material classes A, B, C, D, E
Concrete
Full blocks made from concrete
Building brick
Solid sand-lime brick
Hollow blocks made from lightweight concrete
Vertically perforated brick
Perforated sand-lime brick
Lightweight aggregate concrete
Aerated concrete

You can find detailed information on building materials in the registration document.

Permission

ETA-09/0394
DoP 0251
DoP No. 0091
EPD-FIW-20210314-CBD1-EN

For Details see corresponding Documents

Assembly Instruction

Functionality

The plug is set in push-through installation.
Simple, fast setting by driving the compound nail in using a standard hammer.
The setting process with the screwdriver is performed flush with a standard Bit T 25.
For countersunk installation the setting tool CNplus is required. The insulation disk is covered with a closing cap.
Non-load bearing layers, such as adhesive and old plaster, are included in the maximum useful length.

Documents for Downloading

Approvals

Title	Type	Created	Valid Till
ETA - European Technical Assessment (PDF, 5 MB) European Technical Assessment for fischer termoz CN 8 / fischer termoz CN 8 R / fischer termoz CNplus 8 - Nailed-in plastic anchor for fixing of external thermal insulation composite systems with rendering in concrete and masonry	ETA-09/0394	12/19/2017
DOP - Declaration of Performance (PDF, 6 MB) Declaration of Performance for fischer termoz CN 8 / fischer termoz CN 8 R / fischer termoz CNplus 8	DoP 0251	1/8/2021
DOP - Declaration of Performance (PDF, 6 MB) Declaration of Performance fischer termoz CN 8 / fischer termoz CN 8 R / fischer termoz CNplus 8, according European Technical Assessment ETA-09/0394	DoP No. 0091	4/6/2017
Environmental Product Declaration (PDF, 932 KB) Environmental Product Declaration for fischer Insulation fixings	EPD-FIW-20210314-CBD1-EN	2/22/2022	2/21/2027

System Components & Related Categories

System Components

Hammer drill bit Quattric II

Hammer drill bit Quattric II

The expert for the best performance in reinforced concrete

More Information

Bits

Special bit for the setting tool termoz CS.

More Information

ETA-approval
Drill diameter d₀	8 [mm]
Anchor length l	110 [mm]
Effect. anchorage depth h_ef	35 [mm]
Packaging	Folding box
Amount	100 [pcs.]
GTIN (EAN-Code)	4048962278491

ETA-approval
Drill diameter d₀	8 [mm]
Anchor length l	130 [mm]
Effect. anchorage depth h_ef	35 [mm]
Packaging	Folding box
Amount	100 [pcs.]
GTIN (EAN-Code)	4048962278507

ETA-approval
Drill diameter d₀	8 [mm]
Anchor length l	150 [mm]
Effect. anchorage depth h_ef	35 [mm]
Packaging	Folding box
Amount	100 [pcs.]
GTIN (EAN-Code)	4048962278514

ETA-approval
Drill diameter d₀	8 [mm]
Anchor length l	170 [mm]
Effect. anchorage depth h_ef	35 [mm]
Packaging	Folding box
Amount	100 [pcs.]
GTIN (EAN-Code)	4048962278521

ETA-approval
Drill diameter d₀	8 [mm]
Anchor length l	190 [mm]
Effect. anchorage depth h_ef	35 [mm]
Packaging	Folding box
Amount	100 [pcs.]
GTIN (EAN-Code)	4048962278538