Stand-off installation TherMax 8

The thermally separated stand-off installation in external thermal insulation composite systems

The fischer stand-off installation system TherMax 8 is a solution for thermally separated fixation in external thermal insulation composite systems (ETICS). The threaded rod has a glass-fibre-reinforced cone and cuts its own way through the plaster and into the insulation material without a setting tool. The cone on the head of the threaded rod interrupts the thermal bridge. The adjustable system is suitable for fixations in ETICS and non-load-bearing layers of 45 mm to 180 mm in thickness. The fischer TherMax 8 can hold medium-sized loads such as lights, letterboxes, and lightning rods in concrete, aerated concrete, and masonry made from perforated or solid brick.

Product Description

Advantages

The stand-off installation allows for the fixture to be adjusted to the exact position required, which avoids pressure marks and damage to the ETICS.
The plastic cone creates a thermal barrier between the fixture and the inner fixture, and offers an energy-optimised fixing.
The glass-fibre-reinforced plastic cone cuts its own way through the ETICS with a positive fit, and allows for a simple and fast installation without the need for any special tools.
Combining TherMax 8 with the universal plug UX provides secure anchoring in the substrate.
Without the UX plug, direct installation in a wooden substrate is possible after pre-drilling, too.

Available Product Variants

12 Product variant (s) found

Variant

Drill diameter

d₀

Drill hole depth

h₀

Max. thickness of non-bearing layer

Anchorage depth

h_ef

Viewed 12 of 12 variant (s)

added to cart

View Cart

Application and Permission

Applications

For the thermally separated fixing of:

Signs
Lighting
Letter boxes
Motion detectors
Downpipes
Lightning rods
Blind guide rails

Building materials

Concrete
Vertically perforated brick
Hollow blocks made from lightweight concrete
Perforated sand-lime brick
Solid sand-lime brick
Building brick
Aerated concrete
Wood

You can find detailed information on building materials in the registration document.

Assembly Instruction

Functionality

The TherMax 8 is suitable for pre-positioned installation.
The self-tapping, glass-fibre-reinforced cone cuts its own way through the plaster into the insulation during installation.
The anti-cold cone uses a thermal barrier to minimise heat losses.
Installation does not require any special tools.
For use in wood without a plug, the wood (see the footnote beneath the load table) and plaster must be pre-drilled: TherMax 8: d02 = 14 mm, h02 = 50 mm.
The assortment offers connection possibilities using M6 metric screws, 6.3 mm self-tapping screws, 6.0 mm chipboard screws, and 4.5-5.5 mm chipboard screws if using an SX 5 plug.

Show assembly instruction as PDF

Documents for Downloading

Additional Documents

System Components & Related Categories

System Components

Hammer drill bit Quattric II

Hammer drill bit Quattric II

The expert for the best performance in reinforced concrete

More Information

Drill diameter d₀	10 [mm]
Drill hole depth h₀	120 [mm]
Max. thickness of non-bearing layer e	45 - 60 [mm]
Anchorage depth h_ef	60 [mm]
Cover cap-Ø ADK	18 [mm]
Width across nut	10 [mm]
Chipboard / metric / sheet metal screw	4.5 - 6.0 / M 6 / 6.3
Contents	TherMax, UX 10 x 60, SX 5 x 25, cover cap
Packaging	Folding box
Amount	20 [pcs.]
GTIN (EAN-Code)	4006209456859

Drill diameter d₀	10 [mm]
Drill hole depth h₀	140 [mm]
Max. thickness of non-bearing layer e	60 - 80 [mm]
Anchorage depth h_ef	60 [mm]
Cover cap-Ø ADK	18 [mm]
Width across nut	10 [mm]
Chipboard / metric / sheet metal screw	4.5 - 6.0 / M 6 / 6.3
Contents	2 x TherMax, 2 x UX 10 x 60, 2 x SX 5 x 25, 2 x cover caps
Packaging	Polybag
Amount	2 [pcs.]
GTIN (EAN-Code)	4006209456804

Drill diameter d₀	10 [mm]
Drill hole depth h₀	140 [mm]
Max. thickness of non-bearing layer e	60 - 80 [mm]
Anchorage depth h_ef	60 [mm]
Cover cap-Ø ADK	18 [mm]
Width across nut	10 [mm]
Chipboard / metric / sheet metal screw	4.5 - 6.0 / M 6 / 6.3
Contents	TherMax, UX 10 x 60, SX 5 x 25, cover cap
Packaging	Folding box
Amount	20 [pcs.]
GTIN (EAN-Code)	4006209456866

Drill diameter d₀	10 [mm]
Drill hole depth h₀	160 [mm]
Max. thickness of non-bearing layer e	80 - 100 [mm]
Anchorage depth h_ef	60 [mm]
Cover cap-Ø ADK	18 [mm]
Width across nut	10 [mm]
Chipboard / metric / sheet metal screw	4.5 - 6.0 / M 6 / 6.3
Contents	2 x TherMax, 2 x UX 10 x 60, 2 x SX 5 x 25, 2 x cover caps
Packaging	Polybag
Amount	2 [pcs.]
GTIN (EAN-Code)	4006209456811

Drill diameter d₀	10 [mm]
Drill hole depth h₀	160 [mm]
Max. thickness of non-bearing layer e	80 - 100 [mm]
Anchorage depth h_ef	60 [mm]
Cover cap-Ø ADK	18 [mm]
Width across nut	10 [mm]
Chipboard / metric / sheet metal screw	4.5 - 6.0 / M 6 / 6.3
Contents	TherMax, UX 10 x 60, SX 5 x 25, cover cap
Packaging	Folding box
Amount	20 [pcs.]
GTIN (EAN-Code)	4006209456873