Product Category Picture
Application Picture
Application Picture
1   1

Zinc-alu spray FTC-ZA

Ideal for repairing damaged zinc coatings using colour-matching corrosion protection.

The fischer zinc-alu spray FTC-ZA provides lasting protection against rust and corrosion for all metal surfaces inside and outside. It is preferably used to repair damaged zinc coatings in a matching colour and to coat weld spots and drill hole areas. fischer FTC-ZA is a quick-drying, firmly adhering protection layer and is resistant to many chemicals.

Product Description

  • Zinc-alu spray represents a subtle repair to damaged hot-dip galvanised areas thanks to its colour matching with the hot-dip galvanisation.
  • Thanks to the excellent holding properties on blank metal, it guarantees a lasting connection to the base material.
  • The fast-drying Zinc-alu spray guarantees good, weatherproof corrosion protection and, as such, is suitable for use both indoors and out.

Available Product Variants

1 Product variant (s) found

1 Product variant (s) found

Art.-No. 509241

400 [ml]

1 [pcs.]


Viewed 1 of 1 variant (s)

added to cart

Application and Permission

  • For post-galvanising and repairing damaged areas of galvanised parts, drilling and cutting points and welded joints
  • Repairing damaged zinc coatings
  • Climate control and ventilation technology
  • Guard rails
  • Metal constructions
  • Sheet metal coverings
Building materials
  • All iron and steel surfaces
  • Hot-dip galvanised surfaces following drilling, ironwork or welding
  • Non-ferrous heavy metal
You can find detailed information on building materials in the registration document.
For Details see corresponding Documents

Assembly Instruction

  • Silver-grey colour (similar to RAL 9006) with high gloss level
  • Shake can well for approx. 2 minutes
  • Apply at a distance of 25–30 cm in a cross coat
  • Surface dust-dry after just approx. 8 minutes
  • Touch-dry after 20–25 minutes
  • Fully hardened within 24 hours
  • Smooth, non-porous film
  • High abrasion resistance
  • Long-term heat resistance up to approx. 200 °C (briefly up to 300 °C)
  • Ideal processing temperature of 16 °C to 25 °C

Documents for Downloading

Additional Documents