Product Category Picture
Application Picture
Application Picture
1   1

1c perimeter adhesive foam PUP P 750

The economic adhesive one-component foam for perimeter insulation boards

The fischer perimeter gun adhesive Premium PUP P750 was specially developed for bonding expanded polystyrene panels for perimeter insulation on the basis of DIN 4108-2. Particularly on cold bitumen sheeting and bitumen coatings, the foam has an especially high adhesion rating. The very low level of post-expansion avoids the formation of cavities and guarantees a long-lasting insulation. It can bond around 13 m² of wall, which makes the fischer PUP P 750 particularly cost-effective. Further application areas are the glueing of insulation elements and the filling of cavities. The very low level of post-expansion prevents the formation of cavities and guarantees a reliable bond. Protective gloves for end users are included.

Product Description

  • The high foam yield allows for the bonding of approx. 13 m² of wall space, and is therefore especially economical.
  • The use of the can/gun system provides a time saving of approx. 30% and thus guarantees efficient work.
  • The special PU foam formulation ensures the best adhesion to concrete and bituminous substrates, and allows for the long-term fixing of insulation boards.
  • The very low level of post-expansion avoids the formation of cavities and guarantees a long-lasting insulation.
  • The new non-sticking safety valve guarantees long-lasting functionality.
  • General test certificate from building authorities P-NDS04-772
  • French VOC-emission class A+
  • EMICODE® EC 1 Plus - very low emission

Available Product Variants

1 Product variant (s) found

1 Product variant (s) found

Max. foam yield (free foaming)
Art.-No. 506671

750 [ml]

45 [l]

concrete grey

Aerosol can

Viewed 1 of 1 variant (s)

added to cart

Application and Permission

  • Bonding expanded polystyrene panels
  • Insulating and filling wall penetrations
  • Foaming in electrical installations
  • Filling joints and cavities in all internal constructions
  • Fixing and sealing walls and ceilings
Building materials
  • Concrete
  • Bitumen coatings
  • Anodised layer
  • Gypsum plasterboard
  • Wood
  • Cold bitumen sheeting
  • Plastics (not on PE, PP, Teflon, silicone)
  • Masonry
  • Metals with priming coat
  • Plaster
You can find detailed information on building materials in the registration document.
For Details see corresponding Documents

Assembly Instruction

  • 1-component PU foam
  • Building material class B2
  • Processing temperature environment: +10 °C to +25 °C (can temperature: +5 °C to +25 °C)
  • Non-tacky within approx. 10 minutes
  • Can be cut within approx. 40 minutes
  • Temperature resistant from -40 °C to +90 °C
  • Low heat conductivity
  • Apply a min. of 3 end-to-end stripes per board, vertically from bottom to top on the external wall (spacing approx. 30 cm). The bottom board should be on fixed ground as protection from later slipping. After approx. 10 minutes apply the boards onto the holding surface and press hard.
  • Fresh foam stains can be removed immediately with fischer PU cleaner.

Documents for Downloading