Product Category Picture
Application Picture
Application Picture
1   1

1c adhesive foam PUP ETICS 750

The adhesive one-component foam for ETIC systems with general technical approval

The fischer ETICS gun adhesive foam Premium PUP WDVS 750 has building approval and is suitable for the bonding of EPS panels in thermal insulation composite systems. The special recipe guarantees high adhesive pull strength. The high yield makes the foam particularly cost-effective. In addition, the adhesive foam can be used for the bonding of insulation panels in the perimeter area, for inner wall insulation and for the insulation of cellar ceilings. The very low level of post-expansion prevents the formation of cavities and guarantees a reliable bond. Protective gloves for end users are included.

Product Description

  • The special recipe guarantees high adhesive tensile strength for secure fixing.
  • The high foam yield allows for the bonding of up to 12 m² of wall space and is therefore especially economical.
  • Really low post-expansion avoids the formation of cavities between the wall and insulation panel and guarantees a secure connection.
  • The use of the can/gun system provides a time saving of approx. 30% and thus guarantees efficient work.
  • The new non-sticking safety valve guarantees long-lasting functionality.
  • Building approval for bonding EPS boards in ETIC systems
  • Adhesive tensile strength values (based on ETAG guideline 004/2013, section
  • French VOC-emission class A+

Available Product Variants

1 Product variant (s) found

1 Product variant (s) found

Art.-No. 539164

750 [ml]

light green

Aerosol can

1 [pcs.]

Viewed 1 of 1 variant (s)

added to cart

Application and Permission

  • Bonding of EPS rigid foam panels in accordance with ETAG Guideline 004/2013
  • Fixing of external wall insulation, internal wall insulation and attic insulation
  • Fixing of basement ceiling insulation
  • Bonding of perimeter insulation panels
Building materials
  • EPS-insulation panels
  • Concrete
  • Bitumen coatings
  • Anodised layer
  • Gypsum plasterboard
  • Wood
  • Cold bitumen sheeting
  • Plastics (not on PE, PP, Teflon, silicone)
  • Masonry
  • Metals with priming coat
  • Plaster
You can find detailed information on building materials in the registration document.
For Details see corresponding Documents

Assembly Instruction

  • 1-component PU foam
  • Foam yield sufficient for up to 12 m² wall area
  • Processing temperature environment: +5 °C to +25 °C (can temperature: +10 °C to +25 °C)
  • Open Time approx. 10 minutes
  • Can be cut within approx. 20 minutes
  • Temperature resistant from -40 °C to +90 °C
  • Extremely high heat insulation properties
  • Shear resistance (EN 12090) 38,7 kPa
  • Fresh foam stains can be removed immediately with fischer PU cleaner.
  • When pressed on, an adhesive surface percentage of at least 40% must be achieved.
  • Do not knock the insulation panels against the wall (this damages the foam structure).

Documents for Downloading