The strong screw fixing for all insulation materials and substrates

TermoZ CS II

Name: TermoZ CS II
Brand: fischer

TermoZ CS II is the strong ETICS screw fixing for the secure fastening of any insulation board to all solid and perforated building materials. Developed for the needs of fabricators, TermoZ CS II is easy to use and guarantees fast installation. The insulation fixing TermoZ CS II is approved for all common building material classes A,B,C,D,E. The optional setting tool CS guarantees an optimal setting process without anchor marks.

Product variants

Download of image data

Product variants

Approvals / Test reports

1 Product variant (s)

Drill diameter

Max. usable length at surface-flush installation

Max. usable length at countersunk installation

Drive

Packaging

Amount

Legend = Permission Available— = Permission not Available

Viewed 1 of 1 variant (s)

Advantages

Due to the steel compound screw of the TermoZ CS II, all facade insulations including the fire bar can be fastened securely.
The setting tool is used to countersink the anchor optimally, resulting in an even plaster layer without anchor marks.
Due to the special expansion zone of the anchor sleeve the TermoZ CS II is the first insulation anchor with an approval for hammer-drilled holes in vertically perforated bricks.
The plate design and sleeve labeling allow correct and intuitive application.
The closed plate does not allow dirt to be ejected and thus ensures a clean setting result.
The special geometry of the underhead plate reduces the necessary insertion torque for convenient and fast installation.

Applications

Attachment of ETICS insulating boards on concrete and masonry
Flush installation in all conventional insulation materials
Flush installation of insulation materials such as polystyrene rigid foam panels and dense mineral wool panels
Fixing of ETICS insulating boards for new buildings and energetic building renovations
The screw fixing is also approved for fixing ETICS to ceiling soffits.

Building materials

Building material classes A, B, C, D, E
Concrete
Concrete (weather shell)
Building brick
Solid sand-lime brick
Hollow blocks made from lightweight concrete
Vertically perforated brick
Perforated sand-lime brick
Lightweight aggregate concrete
Aerated concrete

You can find detailed information on building materials in the registration document.

Approvals

ETA-14/0372

Functionality

The fixing is pushed through the insulation into the drill hole and is screwed in. For ceiling soffits, the installation is carried out through the base plaster incl. fabric and insulation.
For countersunk mounting, the setting tool TermoZ CS is required.
Optionally, the setting tool TermoZ CS can also be used for flush installation by turning the stopping disc.
When using the setting tool, the installation is completed when the stopping disc is flush with the insulation panel.
For countersunk mounting the anchor plate needs to be covered with a closing cap.
For a surface-flush setting, a closing plug is not necessary.

Mounting Strip 1 Picture

1 / 5

Mounting Strip 2 Picture

1 / 6

ETA Certification Document

pdf, ETA-14/0372

European Technical Assessment for fischer TermoZ CS 8 and fischer TermoZ CS II 8 - Screwed-in plastic anchor for fixing of external thermal insulation composite systems with rendering in concrete, masonry, lightweight aggregate concrete and autoclaved aerated concrete

Created on 26/03/2021

Load Table

pdf,

TermoZ CS II - Permissible tension loads for a single anchor for multiple use for non-structural applications.

Marketing Documents

pdf,

TermoZ CS II. ETICS screw fixing.

System components

ETA-approval
Drill diameter ( d₀ )	8 mm
Max. usable length at surface-flush installation ( t_fix )	170 mm
Max. usable length at countersunk installation ( t_fix )	170 mm
Drive	TX30
Packaging	Folding box
Amount	100 pcs.
GTIN (EAN-Code)	4048962213652

TermoZ CS II

Product variants

The advantages / Product description

Application and approval

Assembly instruction

Documents for download