The undercut anchor for thin façade panels, such as HPL and fibre cement.
Zykon panel anchors FZP II T PA
The undercut anchor for a concealed fixing of thin façade panels such as HPL, fibre cement and mineral EQUITONE fibre cement panels. Use in conjunction with clasp systems or with other attachments.
Leyenda = Permiso disponible— = Permiso no disponible
Visto 5 de 5 variante (s)
The advantages / Product description
Advantages
The short geometry of the anchor allows it to be used in thin panels starting from 8 mm thickness.
The fixing is not externally visible, creating a visually appealing façade surface.
The matching shape of the undercut anchor creates a inter-locking and stress-free fixing in the conical undercuted drill hole.
Setting the anchor using undercut technology allows the user to select the best structural position in the façade panel. This significantly reduces the bending moment of the panel.
The anchor allows higher failure loads compared to common systems.
This anchor provides much better holding forces than commonly available systems which allows for the use of large format panels.
Application and approval
Applications
For high aesthetical requrements:
The concealed fixing of thin façade panels on exterior and interior façade as well as reveal panels.
Building materials
Fibre cement
HPL panels
Thin panel materials (≥ 8 mm)
You can find detailed information on building materials in the registration document.
Approvals
ETA-22/0669
DoP No. 0360
Assembly instruction
Functionality
dry drilling in ceramic
the drill hole is drilled with an absolute anchoring depth
flush installation of the anchor, the spacer washer will be in full contact with the surface of the material
drilling: first cylindrical, then conical - to create the undercut.
inserting the undercut anchor in the cylindrical-conical undercut hole
expanding the undercut anchor by "pressing down" the washer using the setting tools
