Through-type installation saves time and costs with several attachment points.
Anchor sleeve can be cut to the required effective length. This saves time and lowers complexity when selecting.
Slight adjustment of the anchor sleeves to the effective length using the scale and the movable edge. This saves time.
The advantages / Product description
The injection anchor sleeve for particularly sparing mortar usage in perforated brick masonry.
The grating structure of the FIS H K anchor sleeve is adapted for the injection mortars FIS V Plus,FIS V,FIS VL, FIS Green and FIS P Plus, and ensures sparing mortar use with the best interlock.
The centring blades perfectly align the anchor in the anchor sleeve, and allow for use with various threaded rod diameters.
The barbed hooks secure the anchor sleeve in the drill hole and allow for a trouble-free overhead installation.
The geometry of the anchor sleeves allows for the bridging of non-bearing layers for a simple and convenient installation.
The fischer injection through-type anchor sleeves FIS set 18 x 130/200 M 12/200 is the system component for the use of fischer injection mortars in perforated brick masonry within through-type installations. The anchor sleeve is adapted to suit the fixture thickness for this purpose using the scale and the movable edge, and then cut. The injection mortar is filled from the base of the anchor sleeve. When setting the anchor rod, the mortar is pressed through the lattice structure and then connects with the perforated brick by an interlock. This means that the load is directed into the building material. Non-bearing layers can also be bridged with the injection through-type anchor sleeve. The push-through anchor sleeve FIS H K is suitable for mounting timber constructions, carports, or awnings.
Application and approval
Anchorings in perforated brick masonry with injection mortars FIS V, FIS VL, FIS P Plus, FIS P, and FIS Green
Vertically perforated brick
Hollow blocks made from lightweight concrete
Hollow blocks made from concrete
Perforated sand-lime brick
Solid sand-lime brick
Also suitable for:
Hollow pumice slabs
Slabs made of hollow brick and other perforated brick
Solid pumice and other solid building materials
You can find detailed information on building materials in the registration document.
DoP No. 0189
DoP No. 0195
DoP No. 0273
DoP No. 0354
The system can be used with any of the following injection mortars:FIS V Plus, FIS VW Plus High Speed, FIS VS Plus Low Speed, FIS V, FIS VL, FIS Green or FIS P Plus. FIS P can be used but does not have approvals.
The system is suitable for pre-positioned installation when combined with injection anchor sleeves and threaded rods FIS A or internal threaded anchors FIS E.
The anchor sleeve is placed in the drill hole, and filled with injection mortar from the anchor sleeve base.
Turning in the anchor causes the mortar to be pushed through the anchor sleeve's grating structure, so that it fits the base material perfectly. The load is borne by the interlock.
Injection system FIS V, FIS VS and FIS VW with threaded rod FIS A and anchor sleeve FIS H..K - Highest permissible loads for a single anchor in perforated brick masonry for pre-positioned installation.